GY-HD251E HDV Camcorder 24, 25, 50 Studio

Top-of-the-range, dual role studio & ENG / EFP camcorder with optional studio adapter

GY-HD251E : HDV Camcorder 24, 25, 50 Studio
  • Photo 1 : HDV Camcorder 24, 25, 50 Studio - GY-HD251E

Description

Top-of-the-range, dual role studio & ENG / EFP camcorder with optional studio adapter, offering HD SDI / SDI and 26 pin multicore connectivity. Live uncompressed 1080i and live uncompressed 720p are menu selectable as the HD SDI output, which is also carrying embedded audio and timecode. The DC power requirement is 12V which can be supplied either via the built-in V-plate battery mount or via AC adapter and the 4 pin XLR connector.

Main features

  • 720p/50 & 60, 25 & 30, and 24 recording
  • 1080i/50 and 720p/50 live, uncompressed output
  • HD SDI and SDI with embedded audio and TC
  • 12V system with built-in V-mount plate
  • 14 bit A/D
  • Timecode in/out. Genlock in

    • Additional features

  • Remote control via 6 pin DIN
  • Studio adaptor KA-HD250 option with 26 pin and HD SDI outputs
  • Dynamic shading compensation
  • Special cinema and cine-like gammas

    • Technical specs

    Image pickup device:
    1/3" inch interline-transfer CCDs
    Optical system:
    Colour separation system: F1.4, 3-colour separation prism
    ND filter: +1/4ND, +1/16ND
    No of pixels:
    Total: Approx 1,110,000 pixels
    Colour system:
    PAL (wide band R-Y, B-Y encoder)
    Colour bars: SMPTE HDTV colour bars / EBU colour bars
    Sync system:
    Internal sync (built-in SSG)
    External sync: BB, VBS, signal or HD tri-sync signal
    Sensitivity:
    F8, 2000 lx (typical)
    Minimum required Illumination:
    6 lx with F1.4, at 18 dB
    Lens mount:
    1/3" bayonet system
    Gain:
    0, 3, 6, 9, 12, 15, 18 dB, ALC
    Shutter speeds:
    Electronic Shutter:
    Standard value: 50 Hz
    Fixed values:
    7.5 - 10,000 Hz, 11 steps (HDV HD60p / HDV HD30p)
    6.25 - 10,000 Hz, 11 steps (HDV HD50p / HDV HD25p; DV 50i/25p mode)
    6 - 10,000 Hz, 12 steps (HDV HD24p / DV 24p)
    Variable scan:
    About 60 to 10,000 Hz (HDV HD60p / HDV HD30p) /
    About 50 to 10,000 Hz (HDV HD50p / HDV HD25p; DV 50i/25p mode)
    About 24 - 10,000 Hz (HDV HD24p; DV 24p)
    Dynamic range:
    300% or more
    Recording formats:
    720p/50 & 60, 25 & 30, and 24 recording Recording devices:
    Recording system:
    Built-in MinDV recorder. External optional Hard Disk Recorder DR-HD100E
    VIDEO
    HDV
    Video signal recording format: HDV1 format, 8-bit, 19.7 Mbps
    Compression: MPEG-2 video (profile & level: MP@H-14)
    Sampling frequencies:
    720/60p: 74.25/1.001 MHz (4:2:0 component)
    720/50p: 74.25 MHz (4:2:0 component)
    1080/60i: 74.25/1.001 MHz (4:2:0 component, cross conversion only)
    1080/50i: 74.25 MHz (4:2:0 component, cross conversion only)
    DV
    Video signal recording format: DV format, 8-bit, 25 Mbps
    Compression: DV compression, 4:2:0
    AUDIO:
    HDV
    Audio signal recording format: MPEG1 Audio Layer II
    DV
    Audio signal recording format: 16-bit (locked audio), 48 kHz PCM for 2 channels or 12-bit, 32 kHz PCM for 4 channels
    Usable tape: Mini DV tape
    Tape speed: 18.831 mm/sec.
    Record/play time: 63 minutes (with an M-DV63PROHD tape)
    CONNECTORS
    HD/SD SDI output: 0.8 V (p-p), 75 ohms, unbalanced (BNC)
    HD SDI: SMPTE292M/299M standard (embedded audio)
    SD SDI: SMPTE259M/272M standard (embedded audio)
    Analogue composite output:
    1.0 V (p-p), 75 ohms, unbalanced (RCA)
    Analogue component output:
    Y: 1.0 V (p-p), 75 ohms, unbalanced (BNC)
    R-Y / B-Y: 0.7 V (p-p), 75 ohms, unbalanced (BNC)
    Analogue composite input:
    1.0 V (p-p), 75 ohms, unbalanced (BNC: switchable from Genlock input)
    Genlock input:
    1.0 V (p-p), 75 ohms, unbalanced (BNC)
    Audio input:
    Mic: -60 dBs, 3 kohms, balanced (XLR), +48 V output for phantom power supply
    Line: +4 dBs, 10 kohms, balanced (XLR)
    Audio output:
    -8 dBs, low impedance, unbalanced (RCA)
    Other:
    unbalanced (BNC: switchable from component output)
    Time code output: 0±6 dBs
    Power requirement:
    DC 12 V (10.5 - 17V)
    Power consumption:
    Approx 20W (in record mode)

    Accessories

    Miscellaneous